E36 325i/is 95 Stage 3 Turner Motorsport Performance Package

Product Details

1995 E36 325i/is Stage 3 Performance Package
Peak Power Gain: +40hp / +32ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3 kit features a cold-air intake kit, cat-back exhaust, performance software, and is tuned for stock M3 cams (not included in Package, can be added below). This whole package has been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

The difference between Stage 2 and Stage 3 is that the software we supply is also tuned for the M3 camshaft upgrade. Adding the stock cams from the S50 and S52 M3 engine is a big wake-up call on the 325i motor. You can expect big power gains in the top end. The M3 cams are a perfect blend of power and driveability – you lose almost nothing in low-end torque.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1995 E36 325i/is Stage 3 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip (tuned for intake, exhaust, M3 cams)

E36 M3 Camshafts
We sell this Package without cams. Used M3 cams can be found from various sources (eBay, forums, etc). We can supply you with new, factory M3 cams or the Schrick equivalent (same specs as factory M3). Select one of these options below.

Applications:
1995 E36 325i, 325is, 325ic